|
|
Post by crony on May 24, 2014 20:46:34 GMT
![]() Hello Nic, I tried but failed to have a start/stop/continue message to Midibus. 1.I tried using MMC for "play". Midivision logs : 00:00:00:000 system exclusive Manuf 7F sys databytes Bytes F0 7F 01 06 02 7F This message 2 times. Here's my interface for x-station :  Also into Midibridge I can see a red cross on my midi in (left) while I press the button. I noticed also on press play, that the green line disapeared between midi1 in (left) and midibridge out (right) 2. So I tried
this, based on that post:
audeonic.boards.net/thread/106/tip-remote-controlling-aurias-transportTook the exact same values for testing. First time I hit start : it starts,(youhou...) then nothing worked anymore (bouhou...) no start/stop/continue, finito ! kaput ! The connexion (the green line) disappear, and the stream byte rule also dissapeared... Tried to send the log, but "my device can't send mails"... Argh...Could you help me a bit please ? |
|
nic
Soapbox Supremo 
Troublemaker
Press any key to continue
Posts: 2,011
|
Post by nic on May 24, 2014 21:09:40 GMT
On mobile, so brief:
Sounds like MidiBridge is changing scenes on you unexpectedly if a program change is coming in.
Go to Preferences>Options and set 'Scene Channel' to 'off'. Hopefully that should stabilise things while you test.
BTW, red X just means MidiBridge has detected sysex data on the port - it is just an information message.
Regards, Nic.
|
|
|
|
Post by crony on May 25, 2014 8:55:11 GMT
Great, it works now !  Keep going on it...Thanks ! |
|
nic
Soapbox Supremo
Troublemaker
Press any key to continue
Posts: 2,011
|
Post by nic on May 26, 2014 11:39:42 GMT
I'm not sure this will work for you using those sysex MMC commands.
The Stream Byter only examines the first 3 bytes of a MIDI message, so since the MMC commands are 6 bytes and the start/stop part are in the 5th byte, the Stream Byter is going to treat MMC start and stop as the same message for matching.
I don't know the X-Station at all, but you are best mapping the buttons you want to use for controlling the transport to controller or program change messages and working from there.
Regards, Nic.
|
|
|
|
Post by crony on May 26, 2014 20:48:08 GMT
Using MMC didn't work, but using the same parameters as for Auria tutorial worked well. I have issues now with starting multiple virtual synths, for instance Beat Maker 2 + funkbox. Sometimes funkbox does not start. After moving some stuffs, it's now BM2 that does not start... Well, further testing is needed... |
|
