zex
Converser
Posts: 5
|
Post by zex on Nov 14, 2014 17:57:51 GMT
hello
I use midi bridge to route my blueboard to my midi out on alesis dock 2, and today midi bridge don´t run when blueboard app is runing..
this don´t happens before ,,any help is welcome thank you
|
|
nic
Soapbox Supremo 
Troublemaker
Press any key to continue
Posts: 2,011
|
Post by nic on Nov 14, 2014 18:07:52 GMT
Please post your iOS version and which model iDevice you are using.
Could you also describe what happens fully. Does MidiBridge crash or does it simply not see any blueboard events?
IK broke virtual MIDI in their last SampleTank update. Hopefully they have not also done the same to the blueboard app.
Regards, Nic.
|
|
zex
Converser
Posts: 5
|
Post by zex on Nov 14, 2014 18:20:23 GMT
thank you for your fast replay
ios 8.1 ,ipad 4 and iphone 4s,this behavior happen in this two devices
midi bridge don´t open and crash when i try open it after run the blueboard app
excuse me for the bad english
|
|
nic
Soapbox Supremo
Troublemaker
Press any key to continue
Posts: 2,011
|
Post by nic on Nov 14, 2014 18:34:34 GMT
No problem with your English!
Let me check this for you. I'm not sure how BlueBoard could cause MidiBridge to crash, but I will see if I can reproduce it.
If I cannot, then I will tell you how to get developer trace
Regards, Nic.
|
|
zex
Converser
Posts: 5
|
Post by zex on Nov 14, 2014 18:52:36 GMT
Thank you nic
I will wait your answer
|
|
nic
Soapbox Supremo
Troublemaker
Press any key to continue
Posts: 2,011
|
Post by nic on Nov 14, 2014 20:57:33 GMT
I can reproduce it easily. Once the BB is connected and an event sent MidiBridge will not start.
I will need to hook it up to Xcode and run in debugger to see what is going on. Looks like a side effect of the Bluetooth midi port showing up.
It's late here so will look at it over the weekend.
Regards, Nic.
|
|
zex
Converser
Posts: 5
|
Post by zex on Nov 14, 2014 21:05:26 GMT
Thanks nic
I look for your answer next week
|
|
nic
Soapbox Supremo
Troublemaker
Press any key to continue
Posts: 2,011
|
Post by nic on Nov 16, 2014 14:27:04 GMT
Hi, I located the problem and the fix has been done. It was not a problem in the MidiBridge code but some bad data in the OMAC registry which MidiBridge could not handle. The registry has been updated and MidiBridge should stop crashing as it updates to the fixed registry. Apps should start updating over the next 4 hours or so.
Regards, Nic.
|
|
zex
Converser
Posts: 5
|
Post by zex on Nov 16, 2014 19:10:26 GMT
Thank you nic,you are very fast
|
|
rod
Seeker
Posts: 2
|
Post by rod on Feb 26, 2015 12:01:47 GMT
Hi I aslo have a problem with my blue board, but this is a little bit different.
When I'm trying to connect a message keeps popping out "CoreMIDI session disconnected/failed/lost"
When a first tried to use the app i could make the connection, but suddenly it stopped working.
I'm using a 3rd Gen iPad IOS 7.1.2
Thanks for the help!
|
|
nic
Soapbox Supremo
Troublemaker
Press any key to continue
Posts: 2,011
|
Post by nic on Feb 26, 2015 12:08:08 GMT
Hi rod, That message is from the CoreMIDI wifi network part and not bluetooth. I suspect you are either manually pressing the 'Connect' button on the CoreMIDI Net tab on the Preferences pane or you have 'Connect Automatically' set in the same place but the IP Address there is not correct or missing. These settings are only for the wifi network MIDI and not the BlueBoard connection. If you are not using wifi then leave these as per the default (Connect Automatically = OFF) and these messages will go away. If you are using wifi networking then you need to set the IP Address field to that of the remote wifi device you are using. You need to use IK's BlueBoard app to connect your iPad to your BlueBoard. Regards, Nic. |
|
rod
Seeker
Posts: 2
|
Post by rod on Feb 27, 2015 19:43:00 GMT
Hi Nic, thanks for replying, I just solved the problem. I was trying to send midi messages from my blueboard through my iPad because I couldn't connect directly to my laptop because of the version of bluetooth I have installed. I had my IP Address correct, the problem was that I needed to add a MIDI network in MIDI configuration, that solved the problem. Regards, Link: hexler.net/docs/touchosc-setup-coremidi-network |
|
