Post by nic on Jan 8, 2015 14:04:37 GMT
Hi freddytwonotes,
I pulled out the BB and reverse engineered the locater fwd/back commands. My memory of the BlueBoard must be hazy. In controller modes, it seems to toggle the controller to on/off on each button press, so my first set of rules was probably a bit wrong (might still have worked). In any case, here is a set of rules to try. As always this assumes the BlueBoard is in controller mode and the controller numbers are as per the default (000 to 003)
# f2n BB setup
X1-F = XX +B # block BB crap
B0 = 90 00 7F +C # HUI ping
# but A+B - locate L+R
B0 00-01 = B0 0F 13 +C +D50
B0 00-01 = B0 2F 45 +C +D50
B0 00-01 = B0 0F 13 +C +D50
B0 00-01 = B0 2F 05 +C +D50
B0 00-01 = B0 0F 13 +C +D50
B0 00 = B0 2F 41 +C +D50
B0 01 = B0 2F 43 +C +D50
B0 00-01 = B0 0F 13 +C +D50
B0 00 = B0 2F 01 +C +D50
B0 01 = B0 2F 03 +C +D50
B0 00-01 = B0 0F 13 +C +D50
B0 00-01 = B0 2F 45 +C +D50
B0 00-01 = B0 0F 13 +C +D50
B0 00-01 = B0 2F 05 +C +D50
# but C - play/stop & but D rec
B0 02-03 7F = XX 0F 0E +C +D50 # transport preamble
B0 02 7F = XX 2F 44 +C +D50 # b2 = play dn
B0 02 7F = XX 2F 04 +C +D70 # b2 = play up
B0 02 00 = XX 2F 43 +C +D50 # b2 = stop dn
B0 02 00 = XX 2F 03 +C +D70 # b2 = stop up
B0 03 = XX 2F 45 +C +D50 # b2 = rec dn
B0 03 = XX 2F 05 +C +D70 # b2 = rec up
B0 00-0E = XX +B # block BlueBoard
See how that works. Note that the blue light will only have meaning for button C play/stop and D rec - C it should be blue when playing. The other buttons will light up as you toggle them but will issue the same command. Button D will light up if rec is pressed as long as you first press it when rec was already off. Something like that!
Regards, Nic.
I pulled out the BB and reverse engineered the locater fwd/back commands. My memory of the BlueBoard must be hazy. In controller modes, it seems to toggle the controller to on/off on each button press, so my first set of rules was probably a bit wrong (might still have worked). In any case, here is a set of rules to try. As always this assumes the BlueBoard is in controller mode and the controller numbers are as per the default (000 to 003)
# f2n BB setup
X1-F = XX +B # block BB crap
B0 = 90 00 7F +C # HUI ping
# but A+B - locate L+R
B0 00-01 = B0 0F 13 +C +D50
B0 00-01 = B0 2F 45 +C +D50
B0 00-01 = B0 0F 13 +C +D50
B0 00-01 = B0 2F 05 +C +D50
B0 00-01 = B0 0F 13 +C +D50
B0 00 = B0 2F 41 +C +D50
B0 01 = B0 2F 43 +C +D50
B0 00-01 = B0 0F 13 +C +D50
B0 00 = B0 2F 01 +C +D50
B0 01 = B0 2F 03 +C +D50
B0 00-01 = B0 0F 13 +C +D50
B0 00-01 = B0 2F 45 +C +D50
B0 00-01 = B0 0F 13 +C +D50
B0 00-01 = B0 2F 05 +C +D50
# but C - play/stop & but D rec
B0 02-03 7F = XX 0F 0E +C +D50 # transport preamble
B0 02 7F = XX 2F 44 +C +D50 # b2 = play dn
B0 02 7F = XX 2F 04 +C +D70 # b2 = play up
B0 02 00 = XX 2F 43 +C +D50 # b2 = stop dn
B0 02 00 = XX 2F 03 +C +D70 # b2 = stop up
B0 03 = XX 2F 45 +C +D50 # b2 = rec dn
B0 03 = XX 2F 05 +C +D70 # b2 = rec up
B0 00-0E = XX +B # block BlueBoard
See how that works. Note that the blue light will only have meaning for button C play/stop and D rec - C it should be blue when playing. The other buttons will light up as you toggle them but will issue the same command. Button D will light up if rec is pressed as long as you first press it when rec was already off. Something like that!
Regards, Nic.