|
Post by BluePetrix on Oct 9, 2018 14:41:23 GMT
Hello,
I try to control with the IK BlueBoard the kemper profiler. I configired the BlueBoard app to work in CC Mode.
I assing in the BlueBoard app Button A = CC50 (CC50 Value 1 = Select Slot 1 on Kemper) Button B = CC51 (CC51 Value 1 = Select Slot 2 on Kemper) Button C = CC52 (CC52 Value 1 = Select Slot 3 on Kemper) Button D = CC53 (CC53 Value 1 = Select Slot 4 on Kemper)
The first time I press a button it selects the Slot on the kemper. But pressing a button twice nothing happens. It think BlueRigs sends on first push Value 1 and on second Value 0. I need always Value 1. Is this possible with StreamByter? Thanks a lot!
(by the way I am working on Midi Channel 2)
|
|
|
Post by bluepetrix on Oct 9, 2018 16:58:21 GMT
Okay found a way: # B1 = Channel two / 32 (hex) = 50 (dec) / 00 Value -> Send same B1 32 but 7f (hex) = 127 (dec) IF M00 == B1 32 00
SND B1 32 7F
END
IF M00 == B1 33 00
SND B1 33 7F
END
IF M00 == B1 34 00
SND B1 34 7F
END
IF M00 == B1 35 00
SND B1 35 7F
END
|
|
nic
Soapbox Supremo
Troublemaker
Press any key to continue
Posts: 2,011
|
Post by nic on Oct 10, 2018 8:39:15 GMT
Hi bluepetrix , Yes, that's one way of doing it. Just for completeness, you could also use a single pattern matching (SB I) rule like this: B1 32-35 00 = XX XX 7FRegards, Nic.
|
|
|
Post by bluepetrix on Oct 10, 2018 13:43:49 GMT
Hey Nic, thanks so much! Thats awesome! Need more time to learn this... Again, thank you very much!
|
|