|
Post by siexpression on Feb 1, 2015 18:01:01 GMT
Hi. Thanks for a great app.
I struggle to get my sound desk to control my light desk with midi.
I have a Soundcraft SiExpression that could send midi PC and i have a German Lights product Scan Operator FXll that only receive midi note values to change programs.
I have a cuelist setup for a whole show containing about 30 songs in the SiEx that i want to trigger a corresponding program in the FXll.
The first bank of the FXll starts with midi note 00.
I`ve tried some examples i found in this forum, but could not get them to work.
How do i set this up in Stream Byter?
Rune
|
|
nic
Soapbox Supremo
Troublemaker
Press any key to continue
Posts: 2,011
|
Post by nic on Feb 1, 2015 19:00:32 GMT
Hi siexpression, To map a program change to a note on/off cleanly try: CX = 9X XX 60 +C CX = 8X XX 0 +C +D1000 These blanket rules will map program change n to note n with an equivalent note off following after 1 second. If you need to map arbitrary program changes to notes you will need two rules for each mapping, eg: C0 08 = 9X 3C 60 +C C0 08 = 8X 3C 00 +C +D1000 Which will map program change # 8 (counting from 0) to middle C Post back if you need more help with this. Regards, Nic.
|
|
|
Post by siexpression on Feb 2, 2015 7:44:46 GMT
Hi.
i would like to say thanks for your fast response. It was exactly what i needed.
Regards Rune
|
|