|
|
Post by heartmood on Mar 6, 2015 10:53:13 GMT
Hi nic, here are m,y answers: 1. Yes I programmed the mutes by BM2's MIdi Learn function, shouldn't I do that? The initial setting in BM2 was "no cc" for the mute function. 2. No, all outputs are set to ON, Midi Through is OFF, look at the screenshot, please.  3. No, look here:  I assume, I have to paste/append the # reverse BM2 mute rule in both the start and stop scenes in Mdibridge, I will try an report. Thank You so much nic!!! |
|
nic
Soapbox Supremo 
Troublemaker
Press any key to continue
Posts: 2,011
|
Post by nic on Mar 6, 2015 11:05:52 GMT
Hi heartmood, 1. MIDI Learn is just fine. I was just curious! 2. OK, so BM2 should not be sending any CCs back to PADS 3. Neither will MidiBridge This tells me that the PADS lighting is being controlled internally. It's possible they could also respond to external messages, however, given the strategy of the reverse rules that I gave you, this should be of no consequence for us since we are not sending any to it. Once you have installed the rules you'll probably need to press each one of the pads at least once to sync the BM2 mute states to the pad states though if they are not already in sync. Regards, Nic. |
|
|
|
Post by heartmood on Mar 6, 2015 11:11:10 GMT
IT WORKS, YOU ARE A GENIUS!!!
Just wondering why the iRP lights (in random colors) of the SCENE, FIX VEL, PUSHBUTTON 1, PUSHBUTTON 2 are triggered by some of the other pads too, hmmm?
Thank you!
|
|
nic
Soapbox Supremo
Troublemaker
Press any key to continue
Posts: 2,011
|
Post by nic on Mar 6, 2015 12:04:39 GMT
Hi heartmood, Are you sure that the unexpected colour changes are not from events being sent from BM2 to the iRP? Try switching the iRP OUTPUT in BM2's MIDI SETTINGS to OFF and see if they stop. That's the only place I can think of that is sending events to iRP. Regards, Nic. |
|
|
|
Post by heartmood on Mar 6, 2015 14:39:16 GMT
Hi nic,
just asking for a last favor for today, (maybe I will learn how to write my own rules, hopefully soon):
The same reversed behaviour as for the mute pads I'd like to have for controllers cc1 and cc2, they activate the Effects Reverb (cc1) and Filter (cc2), nice if the lights were on, when the effect is on.
Begging for one more little rule...
TIA and have a nice weekend!
heartmood
|
|
nic
Soapbox Supremo
Troublemaker
Press any key to continue
Posts: 2,011
|
Post by nic on Mar 6, 2015 14:44:58 GMT
Hi heartmood, Easy enough: # reverse BM2 FX
# CC 1 & 2
B0 01-02 7F = BF XX 00
B0 01-02 00 = BF XX 7F
BF = B0Best of luck with your performance. Regards, Nic. |
|
