|
Post by oscarsouth on Dec 11, 2015 19:04:21 GMT
Hello, Apologies if this is a basic request, I've trawled through the message board to try and find a solution but I may be missing something basic. I'm trying to allocate two midi CC controls to the Start and Stop commands , in order to control Midibus' transport control from an external controller (Novation X-Station). I noticed that somebody else has done this, but I can't seem to replicate his success. (http://audeonic.boards.net/thread/131/start-stop-on-station-keyboard) The controls I want to use are CC122 and CC123 on Channel 5 (or any channel other than 1.. or 1 if that's what works!!) although I unfortunately/embarrassingly don't know how to find the Hex code for these . I've tried re-mapping these controls to the controls used by other cases to try and replicate the effects, but no response from MidiBus to any attempts. I can change the control sent into MidiBridge (including high/low values, 'normal'/momentary/toggle button etc.) if necessary. (edit: discovered this www.binaryhexconverter.com/decimal-to-hex-converter, so I'm understanding slightly more now.. B7A/B7B?) Does anyone have any info or resource that could help me with this? Thanks, Oscar
|
|
nic
Soapbox Supremo
Troublemaker
Press any key to continue
Posts: 2,011
|
Post by nic on Dec 11, 2015 19:33:58 GMT
Curt answer (from mobile!). Try:
B4 7A 7F = FA B4 7B 7F = FC
That's CC 122 and 123 (value 127) on channel 5 to start & stop respectively.
Regards, Nic.
|
|
|
Post by oscarsouth on Dec 11, 2015 19:43:03 GMT
That got it!! Cheers!
|
|