|
Post by andren on Jun 3, 2016 14:18:12 GMT
Hi, newbie here. Sorry, but I can't find the answer to my problem. Here´s my setup. I have an external synth (op1) connected to an iconnect audio 4plus audio interface (with my ipad air, running midi bridge) connected to an external drum machine (elektron analog rytm). I just want to transpose the incoming midi notes from the op1 one octave down before it´s being sent to the rytm.
The connection and assignments in the note mapper module work just fine, but my problem is, that the actual note I want to transpose is also being sent. Is it possible to disable the actual note that is played and only let the transposed note through?
Thanks Andre.
|
|
nic
Soapbox Supremo
Troublemaker
Press any key to continue
Posts: 2,011
|
Post by nic on Jun 3, 2016 21:02:24 GMT
Hi andren, If your original notes are getting through then there is likely to be a route going directly from the OP-1 to the Elektron - the note mapper should not preserve the original note. My guess is that the iConnect is routing the events directly as well as to MidiBridge. You'll need to run up the iConnect utility app and check that there is no direct route between the two; let MidiBridge handle the routing. Let me know how you get on. Regards, Nic.
|
|
|
Post by andren on Jun 6, 2016 9:37:59 GMT
Hi nic thanks for your reply. Now it magically works. I tried it again, nothing changed and can now only hear the transposed notes. Made a quick video, if anybody has similar problems. Great app. Will tell everyone.
|
|