Velocity note reduction

Hi 9alex ,

Limiting those 2 notes is easiest with the Stream Byter. Use this table to get the hex numbers of the 2 notes (or use an Event Monitor).

Then, use rules like this example:

# limit C#1 velocity to max 112
9X 25 70-7F = XX XX 70

Which would limit velocities of C#1 (25 hex) to max 112 (70 hex)

You could also use rules to reduce the velocity for those two notes.

However, maybe the best way would be to split out those 2 notes from the event stream and pass them through a Pressure Curve module and you could apply a velocity curve to just those two notes. Then leave the other notes going to the destination directly.

Regards, Nic.