|
Post by beausonofjack on Sept 27, 2019 23:34:51 GMT
Hello all,
Just a warning I am very unfamiliar with this kind of stuff so please forgive my ignorance. I was told what I need to do is possible with StreamByter but if not again I apologize.
I am using AUM to host two audio units and I have the two synths split between the keyboard. Left from C1-C3 (Pure Synth platinum) and right D3-G9 (Ravenscroft275).
My question is: Can I disable the sustain pedal for only the left audio unit (C1-C3)? If so could you please help me out? Thanks
|
|
nic
Soapbox Supremo
Troublemaker
Press any key to continue
Posts: 2,011
|
Post by nic on Sept 28, 2019 8:40:37 GMT
Hi beausonofjack , All you need to do is insert something to block the sustain message from reaching Pure Synth and that should do the trick. Here's how: - Add a StreamByter to AUM - Using AUM's MIDI matrix insert the StreamByter between your MIDI controller and Pure Synth - Paste the following into StreamByter and press 'Install Rules' BX 40 = XX +BThat should do it. The gibberish above is shorthand for: block CC#64 on any MIDI channel (sustain pedal) A longer hand version would be: # block sustain pedal if MT == B0 if M1 == $64 block end endRegards, Nic.
|
|
|
Post by beausonofjack on Oct 3, 2019 10:21:32 GMT
Worked like a charm, you're the best! And what would be the command for blocking the mod wheel and pitch wheel (seperately)? Thanks in advance!
|
|
nic
Soapbox Supremo
Troublemaker
Press any key to continue
Posts: 2,011
|
Post by nic on Oct 3, 2019 10:56:11 GMT
Hi beausonofjack, # block mod wheel BX 01 = XX +B
# block pitchbend EX = XX +BRegards, Nic.
|
|