|
Post by tput73 on Feb 10, 2014 2:16:47 GMT
How do I go about changing a CC in to Pithcbend out? T
|
|
nic
Soapbox Supremo
Troublemaker
Press any key to continue
Posts: 2,011
|
Post by nic on Feb 10, 2014 9:45:07 GMT
Hi tput73,
Try the following rules in the Stream Byter module (replace the '45' in each rule with the hex number of your controller)
# CC 69 (hex 45) to pitchbend BX 45 0-3F = EX 00 BX 45 40-7F = EX 7F
Pitchbend is much greater resolution (14 bit) than a controller (7 bit) and the reason why I use two rules is so that when the controller is all the way up or down then the pitch should be spot on.
Regards, Nic.
|
|