Pg to cc

Hi pzaz,

You need the Stream Byter to do this.

Not knowing much about what you are doing, here is something that will remap app 128 program changes to CC 127 with the CC value being that of the program change in question.

1. Connect the input port (on left) that you want to remap events from to the output port (on right) that you want the remapped events to go to. There should be a green line running between them.

2. Touch the 'beaker' button on the connected input port and press the (i) on the Stream Byter.

3. Press 'On' to enable and paste the following into the text box:

# map PC # to CC 127 value
CX = BX 7F X2

4. Press 'Install Rules' (important) and then Done and Done.

Your program changes will be remapped to CC127 and sent to the output port.

Regards, Nic.