|
|
Post by manueldelatorre on Dec 2, 2016 20:52:16 GMT
Hello there. I need to translate Blueboard's CC messages from latch to momentary in order to use one of the buttons as a sustain pedal in SampleTank. The first button on the BlueBoard has been programmed to CC64. Now I need it to send sustain on when pressed, and sustain off when released.
I know what I need to do (Stream Byter), but I have no clue what to type in. Can someone please help me with the code?
Thanks!
|
|
nic
Soapbox Supremo 
Troublemaker
Press any key to continue
Posts: 2,011
|
Post by nic on Dec 3, 2016 12:36:57 GMT
Hi manueldelatorre, Unfortunately the BlueBoard *never* sends out a MIDI message when you release one of those 4 buttons either in control/program mode, so you cannot make one of the built in buttons momentary. However, external inputs 1 & 2 can be used this way if you have a standard momentary switch connected and calibrated. Depending upon whether the BB is in controller/program mode the BB will send a CC ON when the button is pressed and a CC OFF when released. Which CC number it sends for this depends upon your config. I think it might be 10 or 12 by default but I can't remember. Depending upon what is listening to the controller messages you might find that you don't need MidiBridge to fiddle around at all if the destination in question can correctly respond to the control messages the BB sends. Regards, Nic. |
|
