Remap CC to control DM1 transport buttons

Hi TyCoSquare,

I just managed to map the start/stop buttons on a KORG NanoKontrol to start and stop DM1, so yes it is possible.

You will need to use the Stream Byter and also you will need to know the MIDI codes that your controller sends for whatever button/control you want to map.

I used MidiVision to determine what codes the nanokontrol was sending and it told me:

Play button B0 2F 44
Stop button B0 2F 43

Unless you are going to use a NanoKontrol the rules below will need to be changed for your controller.

Start MidiBridge, connect the controller MIDI (left) to MidiBridge (right) so there is a green line between them.

Touch the beaker icon on the Controller's MIDI in (left) and select the Stream Byter. Paste in the rulesL

# map Korg NanoKontrol transport
B0 2F 44 = FA # start
B0 2F 43 = FC # stop

Press 'Install Rules' and Done & Done again.

Switch to DM1, goto SONG and then MIDI and touch the word 'TEMPO' next to MIDIBRIDGE on left panel of MIDI inputs

Hit play on controller and hopefully DM1 should trigger and stop when you press stop button.

BTW, this works for BeatMaker 2 also.

Regards, Nic.