|
|
Post by lotone on Aug 6, 2015 23:01:28 GMT
Hi everyone I'm trying to use my blue board to turn on/off the live button in midimorphosis, I know I need to convert CC to midi note I just don't know how to go about it the proper way, thank you for your time.
|
|
nic
Soapbox Supremo 
Troublemaker
Press any key to continue
Posts: 2,011
|
Post by nic on Aug 7, 2015 8:51:29 GMT
Hi lotone, Yes, it can be done easily enough with the Stream Byter, Midimorphosis has a 'learn' function for the buttons, so we can select any note we like and 'teach' it to alter the 'Live' (and other functions) control with the note we choose. I will just use note 0. Here are the rules you need (assuming BlueBoard is in controller mode and with default controller values): # lotone BB/morphosis
X1-F = XX +B
B0 00 7F = 90 00 7F
B0 00 00 = 80 00 00
Paste the above rules into the Stream Byter (remember to press 'Install Rules' button!) on the BlueBoard port (on left) and route that port to Midimorphosis (on right). Switch to Midimorphosis, select 'MIDI' and tap the '55 G-1' text field under the 'Live' label. Press button A on the BlueBoard and it should recognise that and assign it to the Live function. Button A should now (hopefully) toggle between Live and not Live each time you press it. Regards, Nic. |
|
|
|
Post by lotone on Aug 9, 2015 5:44:39 GMT
Sweet that worked!! Thank you! I noticed that when I press it works then I press again and it doesn't then I press it again it works, it dose this skip thing I can't really explain well is there a way to make it switch every time, thanks again for time this is really fun!
|
|
nic
Soapbox Supremo
Troublemaker
Press any key to continue
Posts: 2,011
|
Post by nic on Aug 9, 2015 8:24:18 GMT
Hi lotone, Seems like MIDImorphosis toggles too. I thought it would switch on note on and off on note off. No matter. Try adjusting the rules as such: # lotone BB/morphosis
X1-F = XX +B
B0 00 = 90 00 7F
I think that should work. Regards, Nic. |
|
|
|
Post by lotone on Aug 9, 2015 16:01:28 GMT
Second code dose the same thing, but the fact that it works is awesome! If you think of anything else just let me know. Thanks again.
|
|
nic
Soapbox Supremo
Troublemaker
Press any key to continue
Posts: 2,011
|
Post by nic on Aug 10, 2015 19:17:49 GMT
Hi lotone, I just tried this out with BlueBoard and MIDImorphosis and it toggles each time I press the button. Did you maybe forget to either remove the old rules or press that 'Install Rules' button? Regards, Nic. |
|
|
|
Post by lotone on Aug 11, 2015 19:45:42 GMT
I deleted the old one for sure, I even reinstalled the app and it still does the same thing, blue board is Control Change mode, I don't know if that makes a difference or not, or maybe I have a older blue board idk. Maybe there are settings I don't see at the moment, ether way it works if I have to double tap it so be it, thank you.
|
|
nic
Soapbox Supremo
Troublemaker
Press any key to continue
Posts: 2,011
|
Post by nic on Aug 11, 2015 20:28:56 GMT
Hi lotone, Mine was in controller mode also. It's odd as I can understand how the old rules would have resulted in requiring a double press. The new rules definitely did the job for me. Doubt it is to do with an older BlueBoard; mine was purchased very soon after release. If you want to get to the bottom of this you could hook up the midiwrench app and see what is being sent. You should see just a note on event each time you press the button and nothing else. Regards, Nic. |
|
