|
Post by somervid111 on Dec 1, 2017 3:49:28 GMT
Hi Nic, i want to start using MidiFire with my stage setups, I have 2 MidiBridge rule sets I currently use all the time. One is a rule to take message on channel 1 and send it channel 2-6 for my midi guitar setup. The other rule is to take cc 00 to 03 from my BlueBoard and send multiple cc's into my lighting app Luminair.
Can I just put these into Strean byter II? If not, can I please get the rule sets below converted for Stream byter II. # BB/luminair X1-F = XX +B # block unwanted BB channels BX 00 = XX 40 +C +D100 # clone extra CC BX 02 = XX 41 +C +D100 # clone extra CC BX 03 = XX 41 +C +D100 # clone extra CC BX 01 = XX 45 +C # clone extra CC BX 01 7F = XX 42 7F +C +D100 # clone extra CC BX 01 00 = XX 43 7F +C # clone extra CC BX 03 7F = XX 44 7F +C # clone extra CC 68 BX 05 7F = XX 04 7F +C # clone extra CC
And
# Send Ch 1 to Ch 2-6 X0 = X1 +C X0 = X2 +C X0 = X3 +C X0 = X4 +C X0 = X5 +C
Thanks in Advance, Darryl
|
|
nic
Soapbox Supremo
Troublemaker
Press any key to continue
Posts: 2,011
|
Post by nic on Dec 1, 2017 7:41:01 GMT
Hi somervid111, Apart from the +H (hold) flag, MidiFire's Stream Byter is fully backwards compatible with MidiBridge. Both your rule sets should work just fine. Regards, Nic.
|
|
|
Post by Darryl on Dec 1, 2017 13:21:06 GMT
Thanks Nic, this means I can safely go to iOS 11. The only incompatible app I have left is MidiBridge
|
|