|
|
Post by brgregory on Apr 7, 2020 20:49:40 GMT
Hi there Audeonic community. I recently purchased an Arturia Keylab Essential 88 and the black keys are more sensitive and therefore louder than the white keys. I installed the latest firmware and tried all the velocity curve settings to no avail. Could someone possibly write a Streambyter code that would make the velocity sensitivity of the black and white keys even? If this has already been requested and posted please accept my apology. Thank you in advance for your help!
|
|
nic
Soapbox Supremo 
Troublemaker
Press any key to continue
Posts: 2,011
|
Post by nic on Apr 8, 2020 7:18:16 GMT
Hi brgregory , Something along these lines should do it. Please note, I have not tested any of this - it may not even compile! You can use the slider to set the maximum (linear) scale value of the black keys' velocity (default 100). if load
set name Black_Keys
# scale max (slider)
alias Q0 scale_max
assign scale_max = $100 +preserve
set scale_max Scale_Max 0 7F
set slider_display 1
# mark black (1) & white (0) keys
assign L00 = 0 1 0 1 0 0 1 0 1 0 1 0 0 1 0 1
assign L10 = 0 0 1 0 1 0 1 0 0 1 0 1 0 0 1 0
assign L20 = 1 0 1 0 0 1 0 1 0 0 1 0 1 0 1 0
assign L30 = 0 1 0 1 0 0 1 0 1 0 1 0 0 1 0 1
assign L40 = 0 0 1 0 1 0 1 0 0 1 0 1 0 0 1 0
assign L50 = 1 0 1 0 0 1 0 1 0 0 1 0 1 0 1 0
assign L60 = 0 1 0 1 0 0 1 0 1 0 1 0 0 1 0 1
assign L70 = 0 0 1 0 1 0 1 0 0 1 0 1 0 0 1 0
end
# scale black keys velocity 0-Q0
if MT == 90
if LM1 == 1
calc I0 = LM2 * Q0
calc I0 = I0 / 7F
assign M2 = I0
end
endRegards, Nic. |
|
